CTEK MULTI XS 4003 1035 Manuel d'utilisateur télécharger pdf (Page 9)

MAINTENANCE

The charger is maintenance free. Please note that dismantling the charger is not

permitted and will void the warranty. A defective mains cable has to be replaced by

CTEK or by a representative authorised by CTEK. Keep your charger clean. Wipe

it with a soft tissue and mild cleaning liquid. The charger must be disconnected for

cleaning.

EQUIPMENT

The MULTI XS 4003 model is delivered with one battery lead with battery clamps and

one battery lead with eyelet terminals.

TECHNICAL SPECIFICATIONS

Charger model MULTI XS 4003

Model number 1035

Rated Voltage AC 220–240VAC, 50–60Hz

Charging voltage

Car/Motorcycle 14.4V,

14.7V, RECOND 15.8V

Min battery voltage 2.0V

Charging current 4A max

Current, mains 1.2Arms(atfullchargingcurrent)

Back current drain* <1Ah/month

Ripple** Max 240mV

p-p

and 160mA

p-p

Ambient temperature

-20°C to +50°C, output power is reduced

automatically at high temperatures

Cooling Natural convection

Charger type Eight step, fully automatic charging cycle

Battery types All types of 12V lead-acid batteries

(WET,MF,AGMandGEL)

Battery capacity 1.2–140Ah

Dimensions 168x65x38mm(LxWxH)

Insulation class IP65***

Weight 0.6kg

*) Back current drain is the current that drains the battery if the charger is not

connected to the mains. CTEK chargers has a very low back current.

**) The quality of the charging voltage and charging current is very important. A

high current ripple heats up the battery which has an aging effect on the positive

electrode. High voltage ripple could harm other equipment that is connected to the

battery. CTEK battery chargers produce very clean voltage and current with low

ripple.

***)IfconnectiontothemainsisbytheatEuroconnector,thebatterychargerhas

the IP63 insulation class apart from in Switzerland where IP65 applies.

1 2 3 4 5 6 7 8 9 10 11 12

Commentaires sur ces manuels

Pas de commentaire

CTEK MULTI XS 4003 1035 Manuel d'utilisateur Page 9

Commentaires sur ces manuels

Produits connexes et manuels pour Chargeurs de batterie CTEK MULTI XS 4003 1035