EN • 7
EN
1
ANALYSE RECOND PULSE
DESULPHATION SOFT START BULK ABSORPTION
15.8V
31.6V
Increasing voltage to:
14.7V
29.4V
50A
25A
50A until 12.6V
25A until 25,2V
Increasing voltage to:
14.4V
28.8V
50A
25A
1
7
15.8V
31.6V
15.8V
31.6V
15.8V
31.6V
50A until 12.6V
25A until 25,2V
50A until 12.6V
25A until 25,2V
50A until 12.6V
25A until 25,2V
Increasing voltage to:
14.4V
28.8V
50A
25A
Increasing voltage to:
14.9V
29.8V
50A
25A
14.4V
28.8V
Declining current
14.7V
29.4V
Declining current
14.4V
28.8V
Declining current
14.9V
29.8V
Declining current
Checks if voltage
drops to:
12V
24V
Checks if voltage
drops to:
12V
24V
Checks if voltage
drops to:
12V
24V
Checks if voltage
drops to:
12V
24V
Max 15.8V
Max 31.6V
1.5A
13.6V
27.2V
Max 50A
Max 25A
13.6V
27.2V
Max 50A
Max 25A
13.6V
27.2V
Max 50A
Max 25A
13.6V/Max 70A
27.2V/Max 35A
*
12.7V‒14.4V
25.4-28.8V
50‒5A
25-2,5A
12.7V‒14.7V
25.4-29.4V
50‒5A
25-2,5A
12.7V‒14.4V
25.4-28.8V
50‒5A
25-2,5A
12.7V‒14.9V
25.4-29.8V
50‒5A
25-2,5A
Limit:
Max 30h Max 10h 3 minutes
30 min or 4h
depending on
battery voltage
10 days
Charge cycle restarts
if voltage drops
Charge cycle restarts
if voltage drops
Max 4h Max 4h
2 3 4 5
FLOAT
6 8
NORMAL
Ca/Ca
AGM/GEL
AGM POWER
SUPPLY
VOLTAGE (V)
CURRENT (A)
13.6V
27.2V
Max 50A
Max 25A
MOUNTING
When permanently mounting the charger, mount the charger on a firm
surface. Fix the charger with screws in the four holes. Use screws intended for
the surface. Allow space around the charger to not interfere with air cooling.
CHARGING PROGRAMS
*) SUPPLY program is not time or voltage limited
STEP 1 DESULPHATION
Detects sulphated batteries. Pulsing current and voltage, removes sulfates from
the lead plates of the battery restoring the battery capacity.
STEP 2 SOFT START
Tests if the battery can accept charge. This step prevents charging a defect
battery.
STEP 3 BULK
Charging with maximum current until approximately 80% battery capacity.
STEP 4 ABSORPTION
Charging with declining current to maximize up to 100% battery capacity.
STEP 5 ANALYSE
Tests if the battery can hold charge. Batteries that can not hold charge may
need to be replaced.
STEP 6 RECOND
Choose the Ca/Ca program to add the Recond step to the charging process.
During the Recond step voltage increases to create controlled gasing in the
battery. Gasing mixes the battery acid and gives back energy to the battery.
STEP 7 FLOAT
Maintaining the battery voltage at maximum level by providing a constant
voltage charge.
STEP 8 PULSE
Maintaining the battery at 95–100% capacity. The charger monitors the battery
voltage and gives a pulse when necessary to keep the battery fully charged.
READY TO USE
The table shows the estimated time for empty battery to 80% charge
BATTERY SIZE
20Ah 50Ah 100Ah 200Ah 500Ah
CHARGING
CURRENT
10A 2h 5h
20A 2h 5h
25A 2h 4h 8h 20h
50A 2h 4h 10h
20015126D Manual MXTS70, All languages, Print file 003.indd 7 2011-10-11 13:01:31
(6 pages)
(6 pages)
(6 pages)
(6 pages)
(6 pages)
(6 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels